Water Heaters
New generation technology
Helping the Planet and You. Save Water & Electricity!
Water Heaters
Split magnetic water heater has two parts: storage tank & generator unit
● NCRS Certified
● Factory fitted Temperature/Pressure valve included
● Includes Safety pressure valve
● 15 Amp plug connection
● 3 year warranty on manufacture & matterial defects
Description
Salient Features
- Split magnetic induction water heating
- High quality insulation
- Stainless steel water storage unit
- Attractive plastic housing material
- Wall mounted installation
- Capacity: 30L, 40L, 50L, 60L
- Power range required : 2000 - 4000w
- Voltage : 220v
- Standard plumbing fitting
- Class 2 safety rating (no transfers of AC to contents)
- 15 Amp plug connection
- No maintenance costsCan be installed at point of use
How it works
Using a magnetic induction process the water is heated more rapidly than conventional
water geysers
The electrical supply to the generator in the unit is converted into a magnetic
field which heats the water
There is no direct alternating current (AC) in close proximity to the water,
which makes the unit safe
The unit uses new temperature sensing technology that is more accurate
The unit includes a high density thermal insulation layer, to sustain the water temperature
Technical Aspects
The unit has a Class 2 safety rating, the first of its kind in the word, primarily because
there is NO transfer of alternating current (AC) into the water or the holding tank
The risk of rupture of the geyser is eliminated as a built in temperature - pressure valve
forms part of the unit (factory installed)
The electrical configuration of the unit is such that the likelihood of switch leakage
malfunction is reduced, as is the buildup of pipe rust & iron content in the water
The unit includes a high density thermal insulation layer around the storage tank,
which is made stainless steel and magnesium for increased product life
The geyser draws between 2kw - 4kw of power depending on the size of the geyser
Electricity Usage
To heat a conventional150lt geyser from
20DegC to 65DegC takes two and a half
hours and uses 7.8kw of electricity
To heat the same amount of water via the
Harver induction water heater will take approximately
1 hour and uses approximately 2.5kw of electricity
Operating cost Approximately 1/3 of the cost of a conventional geyser
Substantial water saving due to location of the unit
To find out more please contact us – Click here
